LINQ Tetha Roof T-Bar Temporary Anchor Plate - Code: HSRTBA

• 500mm Fixed Anchor for Roof Work
• Can withstand fall arrest forces up to 15kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the roof applied load)
• The Tetha T-Bar has an easy to use camlock, no fixing required
• Install within seconds
• Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
• Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4).

Anchor Standards:

• Conforms to ASNZS 1891.4 requirements
• Conforms to ASNZS 5532:2013 (NOTE the ultimate strength is directly related to the strength of the structure to which the LINQ Tetha anchor plate is installed, it is prudent practice to ensure that structure strength meets criteria and in assessing this it is recommended that the opinion of a qualified person (e.g. a structural engineer) is obtained.
• Passed the corrosion test in accordance with ISO 9227:1990 – 24 hours. LINQ conducts testing over a 48 hour period.

Always refer to product user guide for safe use instructions.