T-Bar Flat Roof Anchor Bar
Product Code: ZCL500
The Maxisafe T-Bar roof anchor provides quick and easy installation for roof access onto sheet metal roofs. Fits to edge of the roof sheeting and easily secured using existing screws and holes in the sheeting.
$82.50
Availability:
In stock
SKU
ZCL500
Did you find this item priced lower than $82.50 somewhere else?
Maxisafe T-Bar Flat Roof Anchor Bar - Code: ZCL500
- 500mm Fixed Anchor for Roof Work
- Material Steel
- Rated for Single use only (15kN)
- Suitable for trapezoidal custom orb roof top
- It is important to ensure that the structure in which the product is being applied to has sufficient strength to sustain the applied load
- Must be used in conjunction with an Energy Absorbing device
- Only suitable for sheet metal roofing with a minimum of 0.42m thickness in Custom orb and Trimdek provided roof sheets are secured in place with roof screws as per manufacturer's instructions
- Read and comply with user instructions before use
Anchor Standards:
- AS/NZS5532 2013 Manufacturing requirements for single point anchor device used for harness based work at height
- AS/NZS1891.2 2001 Horizontal lifeline and rail systems (this standard has provision for Proprietary Systems)
- AS/NZS1891.3 1997 Fall-arrest devices (refer Section 2.3 Anchorage Lines)
Always refer to the User Instruction Manual prior to use.
| Brand | Maxisafe |
|---|---|
| Is Featured | No |
Write Your Own Review